Multiplex Easy Star

$184.99 – qualifies for Free Shipping

The Easy Star offers incredibly stable flight characteristics and durability. Powered by a powerful Permax Speed 400 motor mounted on the top – hard landings won’t break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from durable ELAPOR Foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it’s easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash heap!

* No Painting Required, Prefabricated and Colorful Parts made of Shockproof ELAPOR Foam
* Protected Motor is mounted above the Wings for Safety and Durability
* Especially Designed for Beginners Learning to Fly
* Good Gliding Properties, even with the Motor Turned Off
* The Easy Star can be dismantled for Easy Transport
* Flown with Elevator/Rudder and Motor Control

Ready to Fly Version Includes
* Hitec Neon SS FM 3 Channel Transmitter
* Hitec HFS-06MT Receiver
* Speed Control: X-08 ESC (Included)
* 2 Tiny-S Servos
* X-08 Speed Control Motor Battery and Charger
* Battery: 6 Cell NiMH 1100mAh (Included)
* Minimal Assembly Required
* Wingspan: 54 in.
* Wing Area: 372 sq. in.
* Wing Loading: 10.76 oz. | sq. ft.
* Fuselage Length: 34 in.
* Motor: Permax Speed 400 6V (Included)
* Flight Characteristics: Trainer
* Target User: Beginner
* Weight (English): 24 oz.

Have a spare transmitter, receiver and battery? Try the RR version:
Was $119.99 – now $114.99

Same as the RTF version, just add transmitter, receiver and flight battery.

Have even more extra equipment around and don’t need the RTF or RR version? Try the kit:
$77.99

FEATURES:
Construction: Elapor foam on the fuselage, wing and tail section
Wings: two-piece, foam construction, blue in color
Radio compartment: Foam
Landing gear: No landing gear, model lands on it’s belly
Hardware: Push rods and other hardware included
Motor Mount: Molded into the foam fuselage 400 size Permax motor with high current socket and lead 5″ diameter pusher prop with black spinner (prop faces the rear of the airplane)
Colorful Easy Star logo decals (must be cut out and applied)
Ready to fly in two to six hours

INCLUDES: Foam fuselage, wings, and tail section, 400 size motor (direct drive) with connector and lead (must be soldered to motor), prop, spinner, hardware package, decals and illustrated instructions.

REQUIRES: 3-channel radio (throttle, rudder, and elevator control) with 2 micro servos 12 amp speed control 6 or 7 cell battery from 500 to 1500 mAh with the proper connector (for the above listed speed control use this connector Charger for the battery with proper connector Miscellaneous building equipment

SPECS: Wingspan: 54″ (1370mm) Wing Area: 372 sq in (24 sq dm) Weight: 24oz. (680 g) Length: 34″ (870mm) Airfoil: Flat bottom, high wing Center of Gravity: 3.07″ (78mm) Back from the wing’s leading edge at the fuselage sides. Control Throws- Elevator: Up & Down 3/16″ (5mm) Rudder: Right & Left 3/8″ (10mm)

Check here for parts