GeeBee 3D

Sadly discontinued, but parts are still available

GeeBee 3D is a Ready to Fly brushless powered Airplane. It comes with a powerful outrunner brushless motor pre installed and a 2 cell 1800 Li-poly battery for 20 minute flight times. Can hover at a full 90 degree angle with ease. Very durable due to its light weight and carbon fiber rods that strengthen wing and fuselage. Complete 4 channel control with a super low 13.2 ounce flight weight allows user to perform any maneuver in the book.

Specifications: Length: 29.5 inches, Wing Span: 30.3 inches, Flying Weight: 13.2oz, Motor: Brushless Motor, Speed Control: Sensorless 18-20 Amp, Battery: 2 cell 7.4V,1800mAh, Radio: 4 Channel 2.4ghz 2 stick with Trim tabs, Flying Time: 12-20 Minutes, Propeller: 10×4.7, Transmitter Range; 5000 Feet Controls: Ailerons. Rudder, Elevator, Throttle, Charger: 2&3 cell 60 Minute peak balanced charger with a/c adapter; 6 Channel 2.4Ghz receiver.

Review

I’ve been transferred to St. Thomas in the U.S. Virgin Islands. I wasn’t able to ship any of my flying stuff here so I was stranded with nothing to fly in Paradise. I was searching for a RTF plane when I came across the Parkflyers.com GeeBee 3D. This plane came complete with Brushless Motor, Controller, Receiver & Transmitter, Lipol Battery & Charger and everything required to fly the plane out of the box. All I had to do was stick on the Rudder and trim the servo’s. I charged the battery with the supplied charger and went to the local flying field. It’s windy here (10 to 15 mph or more) but the plane had enough power to handle it. Everyone at the field was impressed with the flying ability of the little GeeBee. It has more than enough power to hover, although I haven’t mastered that trick yet. I was very satisfied with my choice, a great plane at a great price.

Click here for parts for the GeeBee 3D